Double Din Dash Install Radio Kit Wiring Harness Fits 05-07 Jeep Grand Cherokee

Description: Double Din Dash Kit for Jeep Grand Cherokee 2005-2007 Modifications are necessary for this dash kit see installation instructions below. Includes: Aftermarket Dashboard BezelBrackets Wire Harness for standard wiring onlyAntenna AdapterInstructions via email Features:Color: GreyIncludes Air Flow Symbols! Most other kits do not include this detail For the installation of an Aftermarket RadioWill convert factory radio opening to accommodate Double DinUpdate the look of your vehicle at a reasonable priceSolid one piece constructionHigh-Grade ABS Plastic - Factory QualityWire Harness provides secure pin to pin connectionAntenna adapter converts factory antenna to a standard Motorola Special Note:Wire Harness will not retain steering wheel controls.Wire harness is compatible with standard wiring only. Wire harness will not work for vehicles with Rear Tuners. Wire harenss will not work on models with Factory Infinity Systems, Boston Acoustic Systems.Wire harness is not compatible with CAN Bus Radios (models REF, REC, RAQ or RAK; The radio's name can be found on the face of the radio). Other Installation Options:For the Premium Wire Harness option please emailFor the Brown colored version dash kit please emailEIA Color Codes:Yellow – 12V ConstantRed – 12V AccessoryBlack - GroundBlack with White Stripe - Factory Amplifier GroundBlue - Power Antenna / Factory Amplifier Remote Turn OnBlue with White Stripe - Factory Amplifier Remote Turn onOrange – Dash Light Dimmer/IlluminationOrange with White Stripe - Dash Light Dimmer/IlluminationBrown - Mute / Not UsedGreen – Left Rear Speaker (+)Green with Black Stripe Left Rear Speaker (-)White – Left Front Speaker (+)White with Black Stripe – Left Front Speaker (-)Purple – Right Rear Speaker (+)Purple with Black Stripe – Right Rear Speaker (-)Gray – Right Front Speaker (+)Gray with Black Stripe – Right Front Speaker (-) Installation Directions: Tools needed for install - Philips screw driver, Dremel (rotary tool) and a Soldering Iron. You can buy a Soldering gun at Harbor freight for as low as $3.99 and a Dremel (rotary tool) knock off for $10.79 or just look on eBay. Step 1: Gently pull on the factory bezel, it is only held on by a few plastic tabs up top and there are 2 clips on each side of the AC vents (totaling 4) and 1 clip at the bottom.. Step 2: You will see 4 Philips screws holding the factory radio in place, remove the screws and the radio will be lose and ready to come out.. Keep the screw for installation of new double din radio. Step 3: Next unplug all the wire harness and antenna cable leading into the factory radio. You will now have the empty hole ready for new double din radio and your newly purchased dash kit. (DO NOT DISCARD THE FACTORY BEZEL AS YOU WILL NEED THE AC VENTS TO PUT ON THE NEW BEZEL) Step 4: The removal of the AC vents from the factory bezel. Step 5: Install the factory AC vents to the newly purchased aftermarket bezel. Please see video below.. Do this installation on a soft, clean, or protected surface as to not scratch the face or your new bezel....Note while installing AC vents to new bezel, apply firm pressure while melting down the tabs so the AC vents will be flush. Step 6: Screw the supplied brackets onto the side of your aftermarket double din radio ( using the supplied screw that came with the aftermarket radio) Step 7: Wire the aftermarket radio harness to the harness supplied using butt connectors or solder wiring together. Step 8: Plug in aftermarket radio harness to aftermarket radio & install harness to factory radio plug. Step 9: Connect antenna adapter to factory antenna end & aftermarket radio. Step 10: Using the same 4 screws you used to take out the factory radio, screw in your new double din radio. Step 11: Snap New dash bezel back into dash.Make sure radio looks even from side to side and top to bottom, should be a nice even fit all the way around. You may need to readjust the brackets slightly to make radio completely centered. Step 12: ENJOY YOUR NEWLY MOUNT RADIO AND BEZEL ------------------------------------------------------------------------------------------------------------------ General Policies At Autoware we strive to offer you the best pricing, quick shipping and fast customer service for all your aftermarket needs. If you have any questions about a part please contact us before purchasing. We want to ensure that you are buying the right product to avoid the hassle of returning or exchanging. We generally respond to our emails 7-days a week. Shipping and Billing We only accept payment from confirmed PayPal addresses. We typically ship to most countries, as well as the United States and Canada. If you have any questions or concerns about your location please email us. International rate do apply for shipping out of the United States. We will ship packages same day as long as they are ordered and paid for before 8:00 AM EST. If purchased after this time the order will ship next business day. Our business days are Monday thru Friday excluding any federal holidays. Returns We will take responsibility for damage upon arrival or defective parts. Please email us immediately to notify us that there is a problem. If the customer purchased the wrong item or decides that the item is no longer needed a refund will be provided minus a 20% restocking fee and return shipping will be paid by the customer. All other returns or exchanges are personally analyzed and resolved by our team.

Price: 43.75 USD

Location: Kathleen, Florida

End Time: 2024-11-25T15:29:22.000Z

Shipping Cost: 0 USD