HUGE LOT! Yaesu FTDX-1200 (MARS Mod) with tons of Accessories/Cables/Tuner/Etc

Description: YAESU FTDX-1200 - 6M - 160MMARS MOD (LIKE NEW IN BOX) with warranty, two user manuals, schematics, microphone, power cable, and 25ft 10AWG stranded ground cable with zinc bracket and grounding rod)This is for a Yaesu FTDX-1200. It also comes. This radio is in mint condition and comes with a power cable, microphone, CAT control cable, the original manufacturer's box/packaging with warranty, and the original manual - in addition to a spiral-bound, laminated copy of the manual for easier reading (which was made and printed at a local professional print shop). I am also including a 25ft grounding cable 10AWG stranded wire with ground-rod bracket and ground rod. With a radio of this caliber, you'll want to ground it in case of a power surge. While I'm including a ground rod (zinc), you can also ground it to a cold water pipe if necessary.-----ACCESSORIES WITH THE FTDX-1200:This radio also comes with a TON of HAM radio accessories! I am including the following accessories with the FTDX-1200:1) Signalink for Digital communications (such as FT8; FT4; RTTY; PSK-31; CW encode/decode; and many others). The Signalink has the FTDX-1200 Jumper pre-installed; also includes the Data/RTTY to RJ45 cable AND the 8-pin DINN-to-RJ-45; the USB-A to USB-AB Signalink cable (connects PC to Signalink); an AUX-to-AUX digital speaker cable to connect Signalink to external speaker port of transceiver. Additionally, the Signalink also includes the box and instructions.----- 2) An External ATU-100 Antenna Tuner (for End-Fed Multi-Band antennas). While the Yaesu FTDX-1200 has a built-in INTERNAL antenna tuner, this primary works to help match impedance for antennas when it needs minor tuning adjustments. The External antenna tuner is rated up to 100W of power (but actually works up to 124W). The External Tuner comes with a power cable and has an Antenna-In port (Female-UHF...or SO-239 port), a Transceiver-Out port (Female-UHF...SO-239), and also has an input for a Balanced Antenna line - such as a Ladder or Window line balanced-antenna wire. The external antenna is absolutely crucial when using an End-Fed-Half-Wave Multi-Band antenna when tuning for the band/frequency that you want to transmit/receive on.----- 3) A QJE Noise Canceling Power Supply - This is a 30A, 13.38V Power Supply with two device outputs. It includes both a Dual-post Red(+) and Black(-) output, as well as a Cigarette lighter output (if you want to hook a mobile radio up to the power supply). Along with an On/Off switch and a back-lighted Voltage/Amperage display, a switch allows the user to switch between monitoring Volt output or Amp output.Lastly, the Power supply has a knob that allows the noise offset to be adjusted for reducing electrical -interference coming from your circuitry or power supply feedback. This allows for a much clearer sound from your radio while reducing or eliminating unnecessary noise.---- 4) Iambic CW Key: This is a small Iambic CW key. It Includes a 2' foot long 3.5mm - 3.5mm cable for the CW key, along with a 3.5mm female to 1/4"in male adapter. This allows the CW key to plug into the rear CW key input on the FTDX-1200.The front CW key port is for either a straight key (and possibly even a "bug" style key). However, the Iambic CW key must be plugged into the rear CW input of the transceiver in order for the electronic keying to work correctly.This CW key also comes with a magnetic base and an Allen wrench to adjust the various aspects of the CW key.----- 5) 100W Dummy Load 6) Various connectors, tools (i.e. wire strippers; terminal connector crimper; coaxial stripper; etc) Included Coaxial Cables: MPD Digital Cable:Included with the Transceiver package, I am including an MPD Digital 50'ft RG-8x Cable. This coax is Southwire brand and has high-quality silver, waterproof, heatshrinked PL-259 to PL-259 connectors. This is not a cheap Amazon RG-8x cable, nor are the PL-259 connectors constructed of cheap material. This is a $52 cable alone, of the highest quality. It will be sufficient for bands from 6meter - 160meters. ----- Times Microwave LMR-240:Two LMR-240 Jumpers. One 1.5' ft LMR-240 jumper with PL-259 connectors (a.k.a. UHF-Male) and one 3' ft. LMR-240 jumper with PL-259 connectors (UHF-Male).------ 50' ft LMR-250 coaxial cable with PL-259 connectors ------ Included LMR-400 Cable:Also included a 75' ft LMR-400 cable with PL-259 connectors.------ 45' feet RG-8x coaxial cable (white) with one end terminated with a PL-259 connector (other end bare - but connectors and tools are included).

Price: 1915 USD

Location: Cadillac, Michigan

End Time: 2024-12-28T14:19:49.000Z

Shipping Cost: N/A USD