Description: The original Apple drive sleds are made of very brittle material. If you just glance at them, they snap in two. It's more or less impossible to remove or install them without breaking something off. So I spent a day building a new bracket in Solidworks. Mine has infill in hollow rails and other places, without removing ventilation paths. It is much, much sturdier than the original Apple sled. I have added a pair of holes so that SCSI2SD / ZuluSCSI can be mounted in Powermac 7x00 computers with space to insert and extract SD card without removing anything. Bracket will have a few rough spots from separating "support" from the part. This is an inevitable consequence of 3D printing. It is printed with 70% infill so that density is high. Please check pictures out very carefully before purchasing. This item is not returnable. Buyer unconditionally agrees to accept any and all defects.
Price: 19.95 USD
Location: Champaign, Illinois
End Time: 2024-12-27T00:23:38.000Z
Shipping Cost: 6.95 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Apple
Type: Hard Drive Sled
MPN: 815-0446
Vintage: Yes
