Description: All substrates MUST be clean (crucially important), even, and load-bearing. Bond-inhibiting surfaces must be removed before the application of DITRA-HEAT-PS. For complete installation guidelines, please refer to the Installation Handbook or video online Schluter-DITRA-HEAT-PS is easier and faster to install, it can be repositioned if required with less mess and less cleanup. Can walk on membrane immediately after installationNominal 1/4" (5.5 mm) thickness minimizes assembly thickness of the under tile floor heating system and reduces transitions to lower surface coveringsThe Schluter Ditra heated floor mat MUST be installed without using the mortar bed (thin-set), and can also be used as tile underlayment, and waterproofing.Featuring new technology, Schluter Ditra peel-and-stick floor underlayment membrane features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, replacing the need for thin-set mortar Schluter-DITRA-HEAT-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric radiant floor heating system warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing, vapor management, and load support to ensure a long-lasting tile installation. DITRA-HEAT-PS is suitable for applications with engineered wood (plywood), vinyl, wood plastic composite (WPC), luxury vinyl tiles (LVT), luxury vinyl planks (LVP), stone plastic composite (SPC) tiles and planks, and laminate flooring. See the Alternate Floor Coverings over DITRA-HEAT Technical Bulletin for more information, including requirements and limitations. Please note that all substrates must be entirely clean, even, and load bearing. Bond inhibiting surfaces (residue) must be removed prior to the application of DITRA-HEAT-PS. Note: Type, thickness, and format of the tile or stone surface covering must be suitable for the intended application. Minimum tile format is 2" x 2" (5 cm x 5 cm). The underfloor heating system is a highly efficient and eco-friendly way to warm your floors and can be used as a primary or secondary heat source. This system uses electric radiant floor heating cables/ wires with uncoupling waterproofing tile underlayment membrane/ sheets/ floor mats.Available Membranes:Schluter Systems DH512M or DH5MA Ditra Heat Membrane, Schluter Systems DHD810M or DHD8MA Ditra Heat DUO Membrane with sound control and thermal break layer, SunTouch HeatMatrix 8006GRY161-ST Membrane, Laticrete Strata Heat, Ardex UH900 or UI720 Flexbone Membrane, NuHeat AC0105, NUMEM250, FG0800 or FG0801 Peel & Stick Self Adhesive Membrane, Mapei 2855915 Mapeheat Membrane, Prodeso Heat Membrane, Prova TT8006RED15 Flex Heat Membrane.Please note that it's highly recommended to overlap all joint lines using the Kerdi Polyethylene waterproof band/ tape/ strip. Applicable for both residential and commercial usage.To control the In-floor heating system and set the underfloor temperature of your heated floors, you can use a variety of thermostats (Voltage: 120V/ 240V).Available Thermostats:Schluter Systems Ditra Heat DHERT104BW Wi-Fi Touchscreen Programmable Thermostat, Schluter Systems Ditra Heat DHERT103BW Non-Programmable Thermostat, Schluter Systems Ditra Heat DHERT102BW Touchscreen Programmable Thermostat, NuHeat AC0055 Signature WiFi Touchscreen Programmable Thermostat, NuHeat AC0056 Home Touchscreen Programmable Thermostat, NuHeat AC0057 Element Non-Programmable Thermostat, OJ Microline UWG4-4999 WIFI Touchscreen Programmable Thermostat by OJ Electronics, OJ Microline UDG4-4999 Touchscreen Programmable Thermostat, OJ Microline UTN4-4999 Non-Programmable Thermostat, Mapei Mapeheat 2855301 WiFi Programmable Touchscreen Thermostat 94553-01, Mapei Mapeheat 2855201 Programmable Touchscreen Thermostat 94552-01, Mapei Mapeheat 2855401 Non-Programmable Thermostat 94554-01, ARDEX FLEXBONE UH 930 WiFi Touchscreen Programmable Thermostat, ARDEX FLEXBONE UH 931 Touchscreen Programmable Thermostat, ARDEX FLEXBONE UH 932 Digital Non-Programmable Thermostat UH-932, EASY HEAT GTS1 FGS Programmable Thermostat, Laticrete Strata Heat 0802-0404-T WiFi Programmable Touchscreen Thermostat LA08020404, Laticrete Strata Heat 0802-0403-T Programmable Touchscreen Thermostat LA08020403, Laticrete 0804-0404-TW WiFi Smart Programmable Touchscreen Thermostat, Laticrete 0804-0403-TW WiFi Programmable Touchscreen Thermostat, Laticrete 81020606 WiFi Programmable Touchscreen Thermostat, SunTouch SunStat WiFi Programmable Touchscreen Thermostat 500875-SB, SunTouch SunStat Command Touchscreen Programmable Thermostat 500850-SB, SunTouch SunStat Core Non-Programmable Thermostat 500825-SB, True Comfort PS120/240WF Wi Fi Programmable Floor Heating Thermostat, Honeywell TH115AFGB Programmable Floor Heating Thermostat.The above building materials are designed to make your home cozy and warm. The floor heating systems could be installed in the bathroom, shower, kitchen, living room, hallway, bedroom, and dining areas, over plywood or concrete floor using thin-set mortars. Global Trade and Distribution Inc.Got questions?1- 905 660 7600 Technical support line
Price: 422 CAD
Location: 45 Tigi Ct, Concord, ON, 905-660-7600
End Time: 2023-11-15T21:07:56.000Z
Shipping Cost: 0 CAD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: Schluter Systems
Type: Flooring Underlayment
